[CATCH22]

Well I have a bridgeport head with a moog hydrapoint spindle and I was wondering if anyone can tell me exactly how this works, it has a lot of stuff at the top where your draw bar would usually be and I would like a little information on this if anyone can help me out with this.

Thanks Mike

[otpco]

Ia moog running on Mach 3 softwhere and I am using the stuff on the top sort of .Take a look at the mach site under moog Madness there is a few pictures . It works well once you get your head on how it works .Take a look and get back to me . Here is how I think it works . Spindle at zero carrage moves into position ram retracts motor un-does nut .ram extends push out tool . new tool in ram retracts motor does -up nut carrage retracts . note about one ton pull up !!! I modafyed mineand run it on Air have a look at the pictures .

[CATCH22]

I go to the mach3 forum and type in moog in search and I get nothing,can you tell me what your user name is and I will look under that instead?

Thanks Mike

[CATCH22]

Here are a few pics of what it looks like!

http://i717.photobucket.com/albums/w...9/Mikes007.jpg
http://i717.photobucket.com/albums/w...9/Mikes009.jpg

Thanks Mike