Originally Posted by
mattgatten
This is good info. We are experiencing the same problem. If anyone has any leads on what the problem might be, I would greatly appreciate it.
We have a BE 212 that obviously won't work. We suspected it was a monitor problem. The BE 211B that we have is badly 'burned in' and we assumed it was worn out.
Today, I went over and we rewired it for 220v and got it to power up. By reading the manual and pressing the buttons on the TNC151, we were able to get the joysticks working and were able to toggle it to handwheel control. The only thing that wouldn't work is the spindle. Lock and everything seemed to be working. I imagine if we had a monitor that worked, we would see what we needed on the screen to get the spindle running. Our next step was to go after a replacement BE 211B but now it looks like the problem could be deeper. Ugh!
Any advice?
Thanks in advance,
Matt