Looking an older machines, and running into bt35. Seems new holders are pretty much non-existant. And Im used to Cat 40. If I can get a pile of bt35 holders, is there any reason, other than future availability, to avoid this size?
Thread: bt35?
Results 1 to 4 of 4
-
06-04-2009, 03:22 AM #1
Registered
- Join Date
- Dec 2007
- Posts
- 126
bt35?
-
06-04-2009, 08:12 AM #2
Registered
- Join Date
- Apr 2007
- Posts
- 64
us shop tools carries bt-35 holders
http://www.usshoptools.com/current_y...df/PGS_185.pdf
-
06-04-2009, 08:15 AM #3
Registered
- Join Date
- Apr 2007
- Posts
- 64
Here's a better link
http://www.usshoptools.com/current_y...ain_060208.asp
They are after the Cat 40 and Cat 50 holders.
You will need to search a little.
-
06-05-2009, 03:27 AM #4
Registered
- Join Date
- Mar 2008
- Posts
- 443
BT holders bring back memories for me. I used to work at a place where I was the assistant supervisor, responsible for fixturing, programming and tooling up a Cincinnati Cim-X720, it ran BT45 holders. Didn't see those on that site!
Reply With QuoteSimilar Threads
-
NT35 Taper - Same as BT35?
By PhoenixMetal in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 02-23-2009, 08:21 PM
Posting Permissions
