544,159 active members*
2,573 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > CNC (NUM1040 Controller) Xilog plus _PnelMAC Need Help!!!
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    May 2021
    Posts
    1

    Exclamation CNC (NUM1040 Controller) Xilog plus _PnelMAC Need Help!!!

    i have a problem on CNC AUTHOR 427 with NUM 1040 Controller
    I Replaced the PC OF CNC Machine
    and installed the Xilog Plus
    but When open PanelMAC I cant received anything Of motors and cant control of CNC Machine (celebration ,sending programs or Manual control) and this is a two pictures from new PC and Old …
    Old PC PIC...
    https://lh3.googleusercontent.com/pr..._W-hkslD48H97A
    New PC PIC...
    https://docplayer.net/docs-images/54...images/1-0.png

  2. #2

    Join Date
    Jul 2018
    Posts
    31

    Re: CNC (NUM1040 Controller) Xilog plus _PnelMAC Need Help!!!

    Hello,
    1. What version of panel mac did the old pc had ?
    2. You cannot just change the hardware and start running the machine, you need to tell the software the type of machine according to the specific model.
    3. The first image link doesnot work, did it have more than 3 axis, also post the full screenshot of the xilog plus so the errors are visible.
    Regards

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •