[ruben302]

Hello,

I recently bought a second hand 3-axis CNC machine, with albatros TPAEDI32 software on it. The software works, but it is really slow. Albatros TPAEDI32 saves files with a .TCN extension, and the basics of a file looks like this:

TPA\ALBATROS\EDICAD\01.00:25:r0w0
::SIDE=1;
::UNm DL=238.99 DH=164.69 DS=20
OFFS{
#0=0|0
#1=0|0
#2=0|0
#3=0.0|0
#4=0.0|0
#5=0.0|0
#6=0.0|0
#7=0.0|0
}OFFS
VARV{
#0=0|0
#1=0|0
#2=0|0
#3=0|0
#4=0|0
#5=0|0
#6=0|0
#7=0|0
}VARV
VAR{
}VAR
SPEC{
}SPEC
OPTI{
}OPTI
LINK{
}LINK
PREV{
}PREV
SIDE#1{
$=sopra
W#89{ ::WTs  #8015=0 #1=0 #2=0 #3=-20.6 #201=1 #203=1 #204=100 #205=208 #1001=100 #8101=0 #8096=0 #8095=0 #40=0 #39=0 #46=0 #8135=0 #8136=0 #38=0 #8180=0 #8181=0 #8185=0 #8186=0 }W
W#2201{ ::WTl  #8015=1 #1=238.9882 #2=0 }W
W#2201{ ::WTl  #8015=1 #1=0 #2=164.6914 }W
W#2201{ ::WTl  #8015=1 #1=-238.9882 #2=0 }W
W#2201{ ::WTl  #8015=1 #1=0 #2=-164.6914 }W
W#2201{ ::WTl  #8015=1 #1=0 #2=0 }W
}SIDE
SIDE#2{
$=sotto
}SIDE
SIDE#3{
$=frontale
}SIDE
SIDE#4{
$=destra
}SIDE
SIDE#5{
$=retro
}SIDE
SIDE#6{
$=sinistra
}SIDE

But when we load more complex dxf files, (over 5000 lines of code), Albatros TPAEDI32 works way to slow.
Is there a way to generate this code with a different program?

Thanks in advance,
(also sorry for my bad english, I am not a native speaker)

[zreqi]

i have the same problem
did you found a solution?
am looking for a post processer for alpha cam or artcam can genarate a *.tcn file

[ngmajid]

Hi
You can use my way.
I wrote a postprocessor for NX and I make my g-codes inside it with format4 post.
It work nice for me.

[zreqi]

Hi
You can use my way.
I wrote a postprocessor for NX and I make my g-codes inside it with format4 post.
It work nice for me.

Hello
Thanks for your sharing information
Can you please send me the postprocessor you are using ?
[email protected]

[Muhammetalbay06]

Hello
Thanks for your sharing information
Can you please send me the postprocessor you are using ?
[email protected]

[Muhammetalbay06]

Hi
You can use my way.
I wrote a postprocessor for NX and I make my g-codes inside it with format4 post.
It work nice for me.

Hello
Thanks for your sharing information
Can you please send me the postprocessor you are using ?
[email protected]