I'm fairly well versed with FeatureCAM and I have a complex fixture that I do not want my tool paths to collide with. How can I ensure that my tools won't collide with my fixturing?(When feeding and rapiding)
Z rapid plane won't help as my clamps are below the rapid plane.
Thanks,
GisMo
Results 1 to 1 of 1
-
06-26-2008, 02:15 AM #1
Registered
- Join Date
- Apr 2005
- Posts
- 43
Collision Detection and Use Solid as Clamp?
Reply With QuoteSimilar Threads
-
Building Vacuum Clamp and Mechanical Clamp Sub-Table
By automizer in forum DIY CNC Router Table MachinesReplies: 11Last Post: 04-27-2012, 06:46 PM -
Building Vacuum Clamp and Mechanical Clamp Sub-Table
By automizer in forum Work Fixtures / Hold-Down SolutionsReplies: 0Last Post: 04-08-2008, 03:05 AM -
tool holder collision check
By javed08 in forum PTC Pro/ManufactureReplies: 0Last Post: 10-04-2007, 04:42 PM -
stall detection
By mechanicer in forum CNC Machine Related ElectronicsReplies: 24Last Post: 01-23-2006, 10:08 AM -
Head collision detection with 5 axis cam?
By Splint in forum Uncategorised CAM DiscussionReplies: 4Last Post: 11-05-2005, 03:59 AM
Posting Permissions
