548,545 active members*
2,024 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Daewoo Puma 230M - X axis overload
Results 1 to 3 of 3
  1. #1

    Join Date
    Oct 2021
    Posts
    2

    Daewoo Puma 230M - X axis overload

    Hello!

    We moved our Daewoo Puma into new place. Now when we start it up, the Alarm shows 409 - x axis overload.
    Overload is like 180% , but we dont know why. Machine didnt fall or anything when we move it.
    What can cause that problem? We checked spindle on X axis and it's ok.

    Best regards,

    Sribar

  2. #2
    Registered
    Join Date
    Jul 2007
    Posts
    42

    Re: Daewoo Puma 230M - X axis overload

    Check the terminals on the motor and make sure it hasn't come loose. I had the same issue and was told it was a faulty drive. Turns out the terminals were loose. Saved 7K on a new board.

  3. #3

    Join Date
    Oct 2021
    Posts
    2
    Thank you for answer. Can you tell me where is that terminal on the motor?

    Sribar

Similar Threads

  1. Daewoo PUMA 230 MS w/Fanuc 18iT C-axis programming format
    By emexcee380 in forum Daewoo/Doosan
    Replies: 6
    Last Post: 03-23-2016, 10:24 PM
  2. Replies: 0
    Last Post: 04-17-2013, 06:26 PM
  3. Puma 230M left hand tapping
    By eric.lefavour in forum Daewoo/Doosan
    Replies: 3
    Last Post: 02-20-2010, 03:20 PM
  4. DAEWOO PUMA 10 Z AXIS PROB
    By harleydog in forum Daewoo/Doosan
    Replies: 2
    Last Post: 11-30-2008, 09:31 AM
  5. can the tailstock be programmed on Daewoo puma 230m
    By Bigbill in forum Daewoo/Doosan
    Replies: 2
    Last Post: 05-25-2007, 01:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •