[kennl]

Toplakd,

Have tried the scaling of the models, some end up rather large though. The 5mm underlayment seems to be the only material readily available around here so its what I use. How about cutters/bits? What type do you use on your machine?

kenny
seemed like a good idea at the time

[gosha]

nice work rchobby

[toplakd]

I use 3 and 4mm wood, and you should know the difference beetwen 3mm and
5mm is 66%. So the Eiffel that is 80cm high with 3mm, is 133cm with 5mm wood.

I use 2 flute 2mm bits for the speeds up to 2000mm/min and 3mm for higher speeds.

Dejan

Toplakd,

Have tried the scaling of the models, some end up rather large though. The 5mm underlayment seems to be the only material readily available around here so its what I use. How about cutters/bits? What type do you use on your machine?

kenny
seemed like a good idea at the time

[biothome]

segue projeto muito lindo

[stk2008]

Hi all I would like to make some of these but believe it or not its very hard to get balsa wood over here UK.

So what could I use instead MDF does not seem very good as when I have used it before if you have small parts they break easy and Ply wood splinters.

Any pointers thanks.

[stk2008]

Hi all I would like to make some of these but believe it or not its very hard to get balsa wood over here UK.

So what could I use instead MDF does not seem very good as when I have used it before if you have small parts they break easy and Ply wood splinters.

Any pointers thanks.

Sorry about the double post.

MOD PLEASE REMOVE

[Maccarly]

My Cars

[Maccarly]

Bird fodder house for this winter material 18 mm wood and 10 mm PVC
Surface is treated with bee wax oil on the roof comes tar pasteboard

[foxbay3]

Thanksgiving is just around the corner.

Does any one have or know where I can get a DXF file for a turkey??

Thanks in Advance.

Wayne

[freedom2000]

Thanksgiving is just around the corner.

Does any one have or know where I can get a DXF file for a turkey??

Thanks in Advance.

Wayne

not really a dxf, but click here and then on the hat
(trust me it's safe) http://www.jacquielawson.com/viewcar...ode=1796513126

Enjoy
JP

[gosha]

have anybody assembly instructions of suhoi 37 or pics of him

[papy]

My 3 years old son with my toy.

Hi, do you have beatle stag dxf or pdf? Pls send it to :
[email protected]
Tanks

[papy]

Hi there , somebody has Mud Dauber Wasp? I am looking for it. If someone have it will make me very happy. ( It is not a honey bee)

[djt]

Hi, here is the file ...
Sincerely,
Tomino

[djt]

Hello, gentlemen
Seeking such dxf files - can someone help me please?
Sincerely,
Tomino

[gosha]

hire is for you papi 2 models with open and close wings.

[Cristal]

Hi all,

There are so many amazing projects here congratulations but I did not find a tutorial to convert the images or PDF files to vector ( or DXF/DGW) in order to use with ArtCam or similar program.

Do you know where can I find that tutorial? ( or the post where is the tutorial)

thank you
Cristal

[NR.Beno]

Hello all I am new member and I would love to thank you all for this great effort and I take advantage of many of you Thank you

[WoodSpinner]

Previously posted dxf's

Attachments - CNCzone.com-The Largest Machinist Community on the net!

[James Marshall]

That is amazing!!! Thank you sooooooo much!!! Was wondering if some one would do this.