Hey guys I am stuck with this problem of not being able to get my VMC to communicate with the PC for DNC.
I have OneCNC-DNC free software and I keep getting a parity error on the Fadal control. My Fadal control is a 1994 CNC88HS.
My Port settings are:
Baud rate:9600
Data bits: 7
Parity: even
Stop bits: 1
XON/XOFF: enabled
DTR/DSR: disabled
RTS/CTS: disabled
The Program has 12,354 lines but I cannot even get it started. Do I just type DNC at the prompt or DNC,0,1,0,1 to activate the correct DNC mode?
Matthew D.