504,518 active members
4,446 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Doosan puma mx2100 rigid tapping alarm
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Oct 2008
    Posts
    21

    Doosan puma mx2100 rigid tapping alarm

    Hello!
    I need help with the issue by rigid tapping with lower turret on left spindle.
    I get alarm for RIGID MODE DI SIGNAL OFF.
    I don't know where is the problemm in programm.If I enter M29 S300 P21 or P22 cycle work normaly.Only with the P11 doesn't want to work.
    Can anybody help me.
    Regards
    Janko

  2. #2
    Member
    Join Date
    Jul 2005
    Posts
    317

    Re: Doosan puma mx2100 rigid tapping alarm

    There are a few things here.

    You're trying to access the main spindle from the lower path. If you "really" want to do that, you need an M264 "other pulse coder" command on a line by itself BEFORE the commands and then a M265 afterwards.

  3. #3
    Registered
    Join Date
    Oct 2008
    Posts
    21
    Quote Originally Posted by DouglasR View Post
    There are a few things here.

    You're trying to access the main spindle from the lower path. If you "really" want to do that, you need an M264 "other pulse coder" command on a line by itself BEFORE the commands and then a M265 afterwards.
    That's right!
    I tryed with M264 but I get the same alarm.

  4. #4
    Member
    Join Date
    Jul 2005
    Posts
    317

    Re: Doosan puma mx2100 rigid tapping alarm

    Hmm..

    M264 Has to be on a line by itself, before any spindle commands.
    the rigid tap line should read G97S250M29P11 then the G84 Z-.5F.05, G80, then M265.

  5. #5
    Registered
    Join Date
    Oct 2008
    Posts
    21
    Quote Originally Posted by DouglasR View Post
    Hmm..

    M264 Has to be on a line by itself, before any spindle commands.
    the rigid tap line should read G97S250M29P11 then the G84 Z-.5F.05, G80, then M265.
    I tryed but I get the same Alarm on
    Line
    G97S250M29P11

Similar Threads

  1. APC Alarm - Doosan Puma TL2000
    By bullet01 in forum TURNING MACHINES
    Replies: 7
    Last Post: 09-09-2019, 05:38 AM
  2. DS0300 APC Alarm on DOOSAN PUMA 2600LSY
    By DanielBamek in forum Fanuc
    Replies: 11
    Last Post: 09-13-2017, 05:22 PM
  3. Fanuc 18-M alarm when rigid tapping
    By pufferfish in forum Fanuc
    Replies: 0
    Last Post: 05-23-2016, 06:37 PM
  4. Doosan MX2100 ST 2012 Machine 500k$ New Now 350K$
    By ifixcnc in forum Newly Posted Classifieds Listings
    Replies: 0
    Last Post: 04-25-2014, 03:50 PM
  5. ALARM 2034 - MOTOR OVERLOAD - DOOSAN PUMA 400L
    By rpm3000 in forum Daewoo/Doosan
    Replies: 6
    Last Post: 01-21-2014, 11:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •