Hi All,
New to this forum and in the process of purchasing a 3000 CNC.
All that I have seen on forums regarding upgrades is that everything is replaced. If I only want to change the software from the original to a conventional software system, using G codes, do I have to replace the electronics and hardware as well?
Regards
Phil
Thread: DynaMyte 3000 cnc
Results 1 to 4 of 4
-
01-17-2016, 10:00 AM #1
Junior Member
- Join Date
- Jan 2016
- Posts
- 4
DynaMyte 3000 cnc
-
01-17-2016, 06:08 PM #2
Registered
- Join Date
- Jun 2012
- Posts
- 514
Re: DynaMyte 3000 cnc
yes
Big Chipin, spreading tha cheese, I be Big Chipin for days!
-
01-25-2016, 09:36 PM #3
Junior Member
- Join Date
- Nov 2008
- Posts
- 17
Re: DynaMyte 3000 cnc
Hi All,
Have purchased a DM3000, only last week. Will post details shortly.
-
02-12-2016, 10:31 PM #4
Junior Member
- Join Date
- Jan 2016
- Posts
- 4
Hi All,
Originally Posted by bolster55
Cleaned the DM3000 up and looks good, it had been in storage for some 15-20 years. Everything seems to work, but I think I'm having issues with feed rate. After changing the feed rate (this is in manual) it is still machining to fast a feed rate.
Any one help me here at all?
Regards
Phil
Reply With Quote
Posting Permissions
