Our machine has been running relatively smoothly. After coming back from Thanksgiving weekend, it now has issues.
When we run the "TC,1" command, generally the spindle is supposed to raise up, then the tool changer is supposed to come in. It is doing the opposite. The tool changer is trying to come in first, then it is trying to raise the spindle up. This causes the tool within the changer to crash into the spindle.
We tried raising the spindle manually before running the TC,1 command. The turret comes in fine, but then it tries to raise the spindle and hits the z limit.
We've tried powering down the machine, using the SETTO commanda few other things, and it still isn't working.
If anyone has any suggestions, I would greatly appreciate it.
Thanks.