537,761 active members*
3,433 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 10M parameter list for Mori - Help please?
Results 1 to 14 of 14
  1. #1
    Registered
    Join Date
    Nov 2006
    Posts
    417

    Fanuc 10M parameter list for Mori - Help please?

    Does anyone have a 10M control on a Mori Seiki MV Junior that could send their parameters?

    I have been unable to back-up these since I got the machine due to a faulty comm board (won't send - only receives), and thought I could just be careful and make it. Stupid, I know. I should have written them down.

    Over the weekend it got real cold in my shop and the back-up batteries went dead - so the machine did too...

    Best regards,
    John

    P.S. I've posted this on the Mori forum as well.

  2. #2
    Member
    Join Date
    Sep 2008
    Posts
    138

    hi

    Hello

    Please send me you email I will send for you parameter

    Regards

    Quote Originally Posted by John_B View Post
    Does anyone have a 10M control on a Mori Seiki MV Junior that could send their parameters?

    I have been unable to back-up these since I got the machine due to a faulty comm board (won't send - only receives), and thought I could just be careful and make it. Stupid, I know. I should have written them down.

    Over the weekend it got real cold in my shop and the back-up batteries went dead - so the machine did too...

    Best regards,
    John

    P.S. I've posted this on the Mori forum as well.

  3. #3
    Registered
    Join Date
    Nov 2006
    Posts
    417
    Back online. Thanks for the help! Best regards, John B.

  4. #4
    Registered
    Join Date
    Feb 2009
    Posts
    3
    John B,I also lost my parameters due to a bad board.We had backups.But turned out to be for former jr we had with a yasnac control.Could you please forward a parameter list.Thanks,Mike

  5. #5
    Registered
    Join Date
    Nov 2006
    Posts
    417

    Mori parameters

    Here is the file from the machine as we're running it now. I have a couple of small things to fine tune in the settings, but it's making chips right now - so I'll get to it later.

    Hope this helps.
    John B
    Attached Files Attached Files

  6. #6
    Registered
    Join Date
    Feb 2015
    Posts
    174

    Re: Mori parameters

    Very cool, I've been in this situation.

  7. #7
    Junior Member
    Join Date
    Dec 2013
    Posts
    7
    Dear greenery_fr,

    We read that you have all the parameters for the Mori Seiki MV Junior Fanuc 10M with Charge 30 tools, 1988 years. We have problem with loss of all parameters. I would ask if you could send us these parameters. We will be very grateful because I have been looking for parameters but no success. I think you are our last hope. Thanks in advance. I apologize for the anxiety. I'm waiting for an answer as soon as possible.

    My e-mail: iliyan.gay@gmail.com

    Best regards
    Iliyan Gaydarski

  8. #8
    Junior Member
    Join Date
    Aug 2018
    Posts
    3
    Jhon u haventhe pc
    Parameters?
    I need timer, counter keep relays...

  9. #9
    Junior Member
    Join Date
    Aug 2018
    Posts
    3
    Please send to me usinel.mecanica@gmail.com

  10. #10
    Junior Member
    Join Date
    Aug 2018
    Posts
    1
    hey jhon B
    please help me!

    IM LOST PARAMETERS SPINDLE


    I need the parameters of the spindle da mori seiki mv jr fanuc 10m series
    I already typed in the inverter that uses the 4 keys all the values ​​described in the manual, but I believe that there are missing parameters to be typed because when I type the rotation in MDI nothing happens, or sometimes it turns from side to side in low rotation could I send a photo or the written parameters and the tables of the PC as TIMERS RELAY COUNTERS
    thank you
    my email usinel.mecanica@gmail.com

  11. #11
    Member
    Join Date
    Oct 2020
    Posts
    9
    Quote Originally Posted by John_B View Post
    Here is the file from the machine as we're running it now. I have a couple of small things to fine tune in the settings, but it's making chips right now - so I'll get to it later.

    Hope this helps.
    John B
    Hello John B I hope you could help me out directly or guide me in the right direction. I have a Okuma-Howa Millac 3VA with Fanuc system 10m. System Parameters have been lost due to dead battery. Could you help me get a backup for my machine? Please help.
    Best regards, Greg.

  12. #12
    Member
    Join Date
    Oct 2020
    Posts
    9
    Quote Originally Posted by greenery_fr View Post
    Hello

    Please send me you email I will send for you parameter

    Regards
    Dear Sir could you by any chance have parameters for 1985 Okuma-Howa Millac 3VA WITH FANUC SYSTEM 10M? Or possibly contact information to someone who might have this backup? Thank you, best regards. Greg

  13. #13
    Member
    Join Date
    Jan 2021
    Posts
    2

    Re: Fanuc 10M parameter list for Mori - Help please?

    If anyone happens to have or get the parameters, I am desperate!! I'm almost at the point of scraping the machine because I can't get any help... I have a MV junior(20 tool) with a fanuc 10m controller.

    if someone can give them to me I will be sure to pass them on to all the others looking for the same thing.

  14. #14
    Member
    Join Date
    Sep 2008
    Posts
    138

    Re: Fanuc 10M parameter list for Mori - Help please?

    PM me your email

  15. #15
    Registered
    Join Date
    Nov 2006
    Posts
    417

    Re: Fanuc 10M parameter list for Mori - Help please?

    Sorry gents, no longer have that machine and the parameter backup went with it.

    Not that you could use the parameters from a different machine though. The Okuma-Howa engineers set the parameters for the hardware they built that machine with, so the Mori parameters would probably not help much.

    Sent from my SM-G965U using Tapatalk

Similar Threads

  1. fanuc 3t optional parameter list
    By karthick in forum Fanuc
    Replies: 0
    Last Post: 04-23-2014, 02:23 PM
  2. Replies: 2
    Last Post: 01-26-2014, 03:56 PM
  3. Fanuc 12M parameter list
    By duccnc in forum Fanuc
    Replies: 5
    Last Post: 07-28-2008, 07:20 AM
  4. help with fanuc 18i parameter list
    By bob1371 in forum Fanuc
    Replies: 1
    Last Post: 11-06-2003, 03:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •