540,357 active members*
890 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 18-T Ecoca SJ-20 Parameter 6700 not working. Stops on block/m-code
Results 1 to 4 of 4
  1. #1

    Join Date
    Mar 2021
    Posts
    2

    Fanuc 18-T Ecoca SJ-20 Parameter 6700 not working. Stops on block/m-code

    So my small lathe are used for a lot of automated production but the part counter only counts on M30/M02.
    So i won't count until it receives a M30/M02, which means the program will end.

    I've tried to change the 6710 to a different M-code. But it will accept the code +1 to the counter but won't continue to the next block.
    So it freezes on it.


    Thanks in advance

  2. #2
    Registered
    Join Date
    Apr 2011
    Posts
    736

    Re: Fanuc 18-T Ecoca SJ-20 Parameter 6700 not working. Stops on block/m-code

    What ever M Code you decide to use when setting parameter 6710 HAS to be pre written in the ladder to FIN out. Otherwise you will have to add that to the FIN circuit in the ladder. (G4.3 in the PMC Ladder)

  3. #3

    Join Date
    Mar 2021
    Posts
    2
    Quote Originally Posted by drdos View Post
    What ever M Code you decide to use when setting parameter 6710 HAS to be pre written in the ladder to FIN out. Otherwise you will have to add that to the FIN circuit in the ladder. (G4.3 in the PMC Ladder)
    Do you know if it's possible to edit the ladder on this machine or do I need to dump the pmc ladder to be able to edit it

  4. #4
    Registered
    Join Date
    Apr 2011
    Posts
    736

    Re: Fanuc 18-T Ecoca SJ-20 Parameter 6700 not working. Stops on block/m-code

    It all depends on the PMC type that you have. Also the FULL controller type. Fanuc made "5" 18T controls. 18TA, 18TB, 18TC, 18TiA, AND 18TiB which one do you have? If you can post your ladder with the M code you want to use I can see if I can make the change for you.

Similar Threads

  1. ECOCA Barfeed integration NC Error without code
    By gollame in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 10-12-2015, 11:13 AM
  2. Replies: 0
    Last Post: 03-01-2014, 07:18 PM
  3. Replies: 7
    Last Post: 05-07-2012, 10:24 PM
  4. Replies: 1
    Last Post: 11-19-2010, 03:05 PM
  5. Block look ahead bypasses M1 optional stops
    By Paul_S in forum Haas Mills
    Replies: 0
    Last Post: 03-08-2005, 06:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •