587,283 active members*
4,403 visitors online*
Register for free
Login

Thread: FANUC 21i Software Restore by RS232

Results 1 to 3 of 3
  1. 01-17-2011, 03:04 PM #1
    wahidbashir
    wahidbashir is offline Registered
    Join Date
    Nov 2006
    Posts
    53

    FANUC 21i Software Restore by RS232

    Hello,
    Unfortunately, I lost parameters by suddenly down of SRAM battery.
    I have NC parameters and ladder on floppy disk.
    PCMCIA interface is out of order. But last time its RS232 interface was OK.
    Is there way to upload ladder and NC parameters using RS232.
    Reply With Quote Reply With Quote
  2. 01-20-2011, 12:31 AM #2
    Jaguar
    Jaguar is offline Registered
    Join Date
    Mar 2004
    Posts
    69
    It works the same as through the PCMCIA Slot.
    Reply With Quote Reply With Quote
  3. 01-20-2011, 06:16 AM #3
    Bpt Service
    Bpt Service is offline Banned
    Join Date
    Jun 2010
    Posts
    0
    On settings page I/O is set to 4 for PCMCI card..If set to 0 or 1 then machine communicates RS-232..You will have a lot more to worry about then just the NC Parmaters and ladder..That machine has embedded macros for the Toolchange Program and the functions of the custom screen...also has a macro executer to display the custom screens that Bridgeport used..Because you are in Pakistan may be wise to contract Bridgeport UK,,which is now Hardinge, in Leciester, England. Other than that I have no contact info
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. What software is necessary for RS232 Communication?
    By 61SedanMan in forum Haas Mills
    Replies: 6
    Last Post: 08-31-2017, 11:22 AM
  2. Problems after software restore
    By didel4me in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 09-26-2009, 07:29 PM
  3. RS232 communication software
    By gar in forum Haas Mills
    Replies: 6
    Last Post: 08-14-2007, 02:56 AM
  4. PC to RS232 port software
    By Independent CNC in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 13
    Last Post: 02-15-2007, 09:18 PM
  5. software supporting RS232 and RJ-45
    By max_imum2000 in forum CamSoft Products
    Replies: 1
    Last Post: 01-11-2006, 10:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules