547,444 active members*
1,536 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 21i-t function key programming
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Dec 2011
    Posts
    15

    Fanuc 21i-t function key programming

    Anyone know how to program function keys on a 21i-t?

    I would like to run some M codes with them.

  2. #2

    Join Date
    Aug 2019
    Posts
    33

    Re: Fanuc 21i-t function key programming

    Im not sure which keys you are referring to but;

    M-codes are functions of the PMC. Therefor it would be a fairly easy task to either use spare buttons from the Machine Operators panel (Not MDI /QWERTY key pad), or even to add buttons. Then modify the PMC to activate the functions currently controlled by the M-codes. Using the PMC would also allow any interlocking deemed necessary to prevent accidental activation.

    There is also a function called "Software Operators Panel" which could eliminate the need to add buttons. But their operation is limited.

Similar Threads

  1. function of key in control panel
    By nabil_elbadri in forum Daewoo/Doosan
    Replies: 5
    Last Post: 12-18-2020, 10:27 AM
  2. Replies: 3
    Last Post: 07-27-2018, 03:40 AM
  3. Programming FANUC 21i-TB
    By neroseu in forum Fanuc
    Replies: 11
    Last Post: 07-25-2011, 01:10 PM
  4. Can I program a key to preform a function?
    By PriddyShiddy in forum Mach Wizards, Macros, & Addons
    Replies: 0
    Last Post: 07-24-2011, 06:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •