[k-linkz]

Hi guys,

need help, need to send the a programm to the fanuc 6m.

it setup as parallel port. to the motherboard.

the program is 01313.NC

power light is ON

Ready is ON

it shows 01313.NC
ready T1

try Fanuc in mode programm and also Edit

O-9999 read

but the program does not transfer.

what are we doing wrong parameter are set as default to parameter

any idea ? or parameter to change.


https://www.youtube.com/watch?v=MV-IK-N7gt4

[k-linkz]

Nevermind guys, fix the issue.

issue was a limit switch on the Z axis that was loose. so it was doing it zeros but the connection was bad.

was able to do the transfer all good.

thanks.