562,378 active members*
2,936 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc Alarms 1060-1063 Amada Vipros TPP
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2021
    Posts
    22

    Exclamation Fanuc Alarms 1060-1063 Amada Vipros TPP

    Hello All,

    Today earlier we were greeted with following alarms on our Amada Vipros 2510C with Fanuc 18i PB

    1060 AI CLAMP (ON) UPPER (A) LS
    1061 AI CLAMP (ON) UPPER (B) LS
    1062 AI CLAMP (ON) LOWER (A) LS
    1063 AI CLAMP (ON) LOWER (B) LS

    I have tried skimming through internet and looking in to the manuals I have but could not find what these mean.

    Errors came midway punching and now every time we start up machine, these are thrown up. Especially while initializing turret.

    Any idea what might be the issue or what clamps these errors are referring to?

  2. #2
    Member
    Join Date
    Mar 2021
    Posts
    22

    Re: Fanuc Alarms 1060-1063 Amada Vipros TPP

    I think it is related with the auto index stations which we have 2 stations in our turret.

    There are 2 clamps. 1 each at each station. But they seem to be clamped already. Still don't know machine is not getting "Home" in T.

    Some error info I found in some manual:

    https://prnt.sc/26hd3jw

  3. #3
    Member
    Join Date
    Oct 2005
    Posts
    90

    Re: Fanuc Alarms 1060-1063 Amada Vipros TPP

    Quote Originally Posted by stuffsneak View Post
    I think it is related with the auto index stations which we have 2 stations in our turret.

    There are 2 clamps. 1 each at each station. But they seem to be clamped already. Still don't know machine is not getting "Home" in T.

    Some error info I found in some manual:

    https://prnt.sc/26hd3jw
    Contact me ON Whatsapp +91 9404222266

  4. #4
    Quote Originally Posted by stuffsneak View Post
    I think it is related with the auto index stations which we have 2 stations in our turret.

    There are 2 clamps. 1 each at each station. But they seem to be clamped already. Still don't know machine is not getting "Home" in T.

    Some error info I found in some manual:

    https://prnt.sc/26hd3jw
    Hey did you by any chance find a solution for this? I’m getting the same alarm, usually I find a slug under the table but it’s completely clean. I can retract by pulling the belt when the machine is off, but when I try to send the machine to the home position it flags the error. Thanks for any help

  5. #5

    Join Date
    Feb 2021
    Posts
    1

    Re: Fanuc Alarms 1060-1063 Amada Vipros TPP

    Quote Originally Posted by pandaloafers View Post
    Hey did you by any chance find a solution for this? I’m getting the same alarm, usually I find a slug under the table but it’s completely clean. I can retract by pulling the belt when the machine is off, but when I try to send the machine to the home position it flags the error. Thanks for any help
    Hey did you find solution for this problem?

Similar Threads

  1. Amada Vipros 255 ( Fanuc 18 P)
    By Aoubenadou in forum General CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 0
    Last Post: 06-03-2020, 11:34 AM
  2. AMADA VIPROS 258 ( Fanuc 18 PC)
    By Pitre in forum General CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 1
    Last Post: 09-06-2018, 04:47 PM
  3. Amada Vipros 255 (Fanuc 18-P)
    By rphillips10 in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 06-01-2016, 04:09 PM
  4. Amada Vipros 357, Fanuc 04PC
    By jovanov in forum Fanuc
    Replies: 17
    Last Post: 03-31-2016, 01:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •