Well, my router finally arrived...and it is a real Cheap CNC, as in the one made by the company Cheap CNC.
I will give a complete report later this weekend, but it was really not a big deal getting it ready to run once I fixed what UPS's careful handling did to it!
First part I routed was the "wrench.t" file that comes with MAXNC. I will upload pictures with my report.
Who, ha I am finally routing!
Results 1 to 2 of 2
-
05-10-2003, 05:25 AM #1
Gold Member
- Join Date
- Apr 2003
- Posts
- 90
First Part Cut on a real "Cheap CNC"!
Paul Riedlinger
Let the chips fall where they may...I'm not going to clean them up!
-
05-10-2003, 05:44 AM #2
Registered
- Join Date
- Mar 2003
- Posts
- 271
Cool. I bet your are excited! Please keep us posted. Photos too! How fast does the machine jog? Are they oillite bushing or ball bearing?
My little piece of the web!
http://users.adelphia.net/~wjdupont
Reply With QuoteSimilar Threads
-
Kcam Cut depth
By 47MLB in forum Uncategorised CAM DiscussionReplies: 6Last Post: 01-18-2012, 08:04 PM -
Beginner moldmaking questions
By fastturbovet in forum MoldmakingReplies: 17Last Post: 06-23-2005, 09:38 PM -
PICS - BOAT HULL CUT WITH CNC
By ninewgt in forum DIY CNC Router Table MachinesReplies: 16Last Post: 08-03-2004, 12:21 AM -
Cut part render, and G code
By moose in forum GibbsCAMReplies: 12Last Post: 11-24-2003, 03:20 PM -
First Metal Part Cut!!
By WOODKNACK in forum Benchtop MachinesReplies: 5Last Post: 07-07-2003, 03:22 AM
Posting Permissions
