Just curious how well the deluxe stand contains the mess when using flood coolant? Does the "table mounted splash and chip shield" actually prevent chips and coolant from flying all over? Does the lack of protection at top matter? Lots of questions... but I would rather not have coolant mist/spray all over the room. Thanks.
Results 1 to 2 of 2
-
04-09-2007, 02:25 AM #1
Registered
- Join Date
- Mar 2007
- Posts
- 18
Flood Coolant Containment (Deluxe Stand)
-
04-10-2007, 05:16 AM #2
Gold Member
- Join Date
- Jun 2006
- Posts
- 3063
I've had few problems with chips or coolant escaping, but I'm still at the tentative stage when it comes to cutting (small DOC) and have throttled coolant flow back a fair amount from the maximum that the pump will produce.
The major exception is when using the Rotary Technologies flycutter, but it has a 2" diameter face that really slings coolant at recommended speeds.
Mike
Reply With QuoteSimilar Threads
-
Flood coolant on steroids
By Scott_bob in forum DNC Problems and SolutionsReplies: 7Last Post: 04-30-2007, 07:07 PM -
How Do You Like The Deluxe Tormach Stand?
By Willyb in forum Tormach Personal CNC MillReplies: 3Last Post: 01-31-2007, 04:38 PM -
Coolant for Tormach with deluxe stand?
By MichaelHenry in forum Tormach Personal CNC MillReplies: 10Last Post: 08-20-2006, 05:49 PM -
Flood Coolant Pump
By rcazwillis in forum MetalWork DiscussionReplies: 5Last Post: 11-15-2005, 08:19 PM -
question about flood coolant
By nicad in forum MetalWork DiscussionReplies: 6Last Post: 10-25-2005, 04:03 AM
Posting Permissions
