[hkinkade]

Is there a way to have Fusion automatically add a dwell after it starts the spindle? My spindle has a slow start ramp and isn’t up to speed when it begins to cut. I’m a little tired of editing fusion gcode to add it each time.

[deadlykitten]

hy i can help you with a small program, that will edit your file automatically, in background

thus, you won't even know that it is there / kindly

[hkinkade]

hy i can help you with a small program, that will edit your file automatically, in background

thus, you won't even know that it is there / kindly

Would you like to share your idea with myself and the forum?

[awerby]

You'd add that in the post-processor for your machine. https://www.autodesk.com/products/fu...st-processors/

[servtech]

Is there a way to have Fusion automatically add a dwell after it starts the spindle? My spindle has a slow start ramp and isn’t up to speed when it begins to cut. I’m a little tired of editing fusion gcode to add it each time.

M3 S1000
G4 X10. (dwell code, sometimes F)
Etc.

G4 X10 or F10 on many controls is a 10 second dwell, check your manual.

You could write a sub program named spindle start with this M3 and Dwell then store it.