I have had my lathe for a couple of years now and this is the first time I have had a problem threading. I have it set up to cut 14tpi but it is cutting closer to 15tpi, anyone else run into this problem? Not sure how to correct it.
Thread: G0602 threading problem
Results 1 to 3 of 3
-
10-21-2013, 07:53 PM #1
Registered
- Join Date
- May 2007
- Posts
- 125
G0602 threading problem
-
10-24-2013, 01:33 PM #2
Registered
- Join Date
- May 2007
- Posts
- 125
Problem Solved!
-
03-13-2014, 04:19 PM #3
Registered
- Join Date
- Aug 2011
- Posts
- 57
I was using my buddies G0602 to turn and thread my G0704 ballscrews and mistakenly picked up the 46T instead of 40T change gear. It created a very close thread to what I was trying to achieve - didn't realize till I had the full thread form and placed a pitch gage against it and it didn't fit. I should have placed the pitch gage on after a couple scribe passes for verification, but I was in a hurry and it bit me.
The stamping on the change gear was very light and I mis-read the "6" for a "0"......dang!
-Mike
Reply With QuoteSimilar Threads
-
G0602 Threading Guide ( Windows App )
By RWey50 in forum Benchtop MachinesReplies: 6Last Post: 06-24-2025, 10:16 AM -
Left Handed Threading on a Grizzly G0602 10x22 Benchtop Lathe
By BigSmith in forum Benchtop MachinesReplies: 3Last Post: 10-11-2012, 05:34 PM -
g0602 metric threading
By rusmannx in forum Benchtop MachinesReplies: 3Last Post: 03-25-2012, 08:47 PM -
G0602 Threading Start Point
By beastmasterv in forum Benchtop MachinesReplies: 3Last Post: 03-07-2012, 11:06 PM -
G76 Threading problem
By bmlw in forum FanucReplies: 7Last Post: 02-26-2010, 11:42 AM
Posting Permissions
