[Spatula Tzar]

I recently received a Shoptask 17 20 XM TC lathe/miller combo, but I have no idea how to use it. I understand the concept of machining and what all the controls do, but I don't know how to make anything. Can someone point me to some resources on machining? Preferably online documents.

Thanks!

[fkaCarel]

This question puzzles me. If the postal address was correct, you are now burdened with a machine. Learning machining is the same as learning to walk: you stand up, lean forward, try a few steps, fall, cry and try again. Look, ask and study and don't directly plan on an 1:1 working scale model of an 747.

Carel

[CND-Haas jockey]

I would suggest finding out from your sales rep whether there is an introductory seminar on using your machine. This is becoming more and more prevalent with most manufacturers now, and for a few hundred sheckels you will find your world opened up in no time. I went on a week long course with haas, and every thing became alot clearer by the end of the week.

[Spatula Tzar]

A (very generous) friend gave it to me, so I have no sales rep to contact. Yes I know I need to start small, but I have no idea how to start at all. I can't find any books at the library, and find nothing but vague references online.

Any suggestions on reading material?

[ironDigit]

on a lathe a nice way to get to know it i'ld advise you to start to try too just make some simple chips and, No not paprika neither cheese onion but ALUMINUMchips lo
after doing that try and make ya some different sized threads i'm sure by the time you're done with that your imagination will have took you on a journey to places you never thaught existed man and if my method doesnt work for you

i wish you luck m8

[Spatula Tzar]

I can make chips easily enough, but threads is a big jump for me. I have no instructions, no guides, nothing. Sure I have plenty of ideas on simple things to make, but I'm not even sure if the cutting bit is positioned properly.

[widgitmaster]

Try this book in CD version!
Machine Tool Technology Basics, CD-ROM Only, PDF Edition

Steve Krar, Art Gill, Peter Smid and Paul Wanner
416 pages, Illustrated,
Published: February, 2005
ISBN (0-8311-)3222-1
Price: $57.50

http://www.industrialpress.com/en/Bo...9/Default.aspx

Or the Book:
Machine Tool Technology Basics

Steve Krar, Art Gill, Peter Smid and Paul Wanner
416 pages, Illustrated, 7 x 10
Published: May, 2003
ISBN (0-8311-)3134-9
Price: $57.50

http://www.industrialpress.com/en/Bo...2/Default.aspx


This is a college text book used in the Machine shop at the locat Community College.
It covers the history of all machines, and describes in detail the how-to for most basic machining principles!

Have fun!
Eric