Can someone provide me with the subprogram from a Haas control that does engraving? It is subprogram #O9876.
Thanks in advance!
Can someone provide me with the subprogram from a Haas control that does engraving? It is subprogram #O9876.
Thanks in advance!
I went to find this in my control...turned setting 23 off, and it wasn't there. But, I ran a G47 program and in single block I can clearly see that the O09876 program is running. If I could figure out how to get it off the machine, I'd gladly send it over...I'm curious about how to recover these "hidden" programs.
I believe it is a macro subroutine...
You recover them by saving them to a computer so you can re-install them if bad things happen.
Tim
*BUMP* Anyone have any luck finding this?
I have it in front of me now. I can either paste it on here or email it to you.
Chuck
HAAS vfo,vf3ss,sl20, Akira Seiki H4XP, CMS gang lathes x3, Dimension 1200es 3D Printer
paste it here please
Here it is: O01112 (ENGRAVE SEQUENTIAL SERIAL NUMBERS)
T7 M06
G43 H07
G00 G90 G54 X1. Y-1. Z1.
M08
S6000 M03
Z.1
G47 P0 X1. Y-1. J0.18 R-0.2 Z-0.01 F75. E50. (S/N)
G47 P1 J0.18 R-0.2 Z-0.01 F75. E50. (#####)
M09
G00 G28
M30
www.WebMachinist.Net
The Ultimate Online Source for Machinist Related Stuff!
Hey guys,
Sorry I couldn't get it posted today. Shortly after I replied I got swept away into the shop, never to return to my computer to do what I actually needed to do. I'll send it out tomorrow sometime in the AM. It's a long program, at least longer then the few lines written above. But I'll paste it here unless told otherwise.
Edit: Ok so I'm looking at this file and it's very long. If you want it I'd be best to shoot me a PM and I'll email it to you.
Chuck
HAAS vfo,vf3ss,sl20, Akira Seiki H4XP, CMS gang lathes x3, Dimension 1200es 3D Printer
Hello,
Here is O09876 makro program from NGC machine.
I hope it will be of some use.