I have been trying them all. Testing them out, please feel free to add your opinion and suggestions, with the exception of OneCNC I believe I would pare the other 2 with Alibre CAD expert/pro

OneCNC Expert/Pro Possibility with 4th axis addon

The most expensive if going expert and 4th axis
2nd when it comes to features (IMO) compared to SprutCAM
Easy to use interface, pretty nice all around
Pro version lacking 4th indexing sucks, and seems like its quite short on tool path options, hence need for Expert

SprutCAM Master
Seems nice, good price for the features
but tool path geometry just takes a long time to generate vs the other 2
Buggy, had it crash when trying to get a 3d model's geometry to use for tool path
The cheapest of the 3? (depends which site you buy)

VisuallMill Pro
Easy to use, not easy feature packed
Pretty quick in tool path generating
Cheapest among the 3, with features in between the 2?
comes with 4th axis ability



I understand that OneCNC has CAD, I would use it, but its still no Alibre CAD, adding Alibre to the equation adds quite a bit of cost


personally im leaning on OneCNC expert with 4th axis, but Only need indexing :/ this is quite a high price when adding 4th axis

(update seems that it could be my configuration, but this still should not be the case, im going to try different SprutCAM, file demo as suggested by others)

Please feel free to add or contest anything that I have noticed about the software above...

I only used them for a few days after work. (and will continue to use as long as the demo's last)