I was wondering if there is anyway to turn splines into something usable so I can join them with lines and arcs. Thanks- Robbie
I was wondering if there is anyway to turn splines into something usable so I can join them with lines and arcs. Thanks- Robbie
2 ways.
1) save as v12 .dxf. Close and reopen. What were splines will now be polylines.
2) Download a spline - to - polyline utility. See here: http://www.cnczone.com/forums/showthread.php?t=12148
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks Gerry, it worked.