[Rance]

Hi. I'm looking to buy an HF Trim Router. In one of the latest catalogs I have they are listed for $20. Is that the cheapest they've been or can I expect to wait and get them for cheaper? Thanks. Oh, and are there any coupons available online? Thanks folks.

[slick_rick]

http://www.harborfreight.com/cpi/ema...A/Images/1.gif

My question is, is it worth owning?

[DreamFlyer]

Sign up to receive HF email flyers and you will get a coupon listing at least once a week. I have seen the trim router as low as about $13.00.

As far as are they worth it, the only comparison I could make is over the years I have bought the 3-1/2" or 4" angle grinders around the shop as extras or to lend out. They usually were less than $20.00. They gave decent service though they are not as good as my Milwaukee.

[edo]

I built the JGRO and put a HF Trim Router on it. It works great, and for $20 I'm certainly not worried if I have to replace it. It only takes 1/4" bits, so I bought a collet adapter from MLCS to use 1/8" bits. Here's a picture of it on my JGRO.

[Rance]

Thanks guys. Exactly what I needed.