535,288 active members*
2,517 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Deckel / Dialog > I need technical support for Deckel FP50CC please
Results 1 to 6 of 6
  1. #1
    Registered
    Join Date
    Feb 2008
    Posts
    15

    I need technical support for Deckel FP50CC please

    Machine Supplier: Deckel

    Machine Type: FP50CC

    Serial Number: 2813-0234

    Machine control: Dialog 11
    Attachment 453124Attachment 453126Attachment 453128Attachment 453130
    The problem is as follow:



    When the system starts, the sequence of starting runs normally and then it finally gives the indicated status in attachments.

    Pushing green control ON button in the operator panel has no effect i.e. (drives not start), the machine then gives no error messages and no alarms as indicated in attachment "monitor1.jpg". But the abnormal behavior is that after the sequence of starting is finished:

    The (READY) led in the NPC card is ON whereas the (RUN) led in this card is OFF as indicated in attachment "Dialog11.jpg"
    The (CNC) led in the NSV card is OFF as indicated in attachment "Dialog11.jpg"
    Please give help to fix this problem

  2. #2
    Registered
    Join Date
    Nov 2016
    Posts
    3

    Re: I need technical support for Deckel FP50CC please

    Try https://www.practicalmachinist.com/v...a-abene-mills/. There are very experienced people there.
    Note to Moderator - I hope this post does not contravene forum rules - I'm just trying to assist the OP.

    Bill

  3. #3
    Registered
    Join Date
    Nov 2016
    Posts
    3

    Re: I need technical support for Deckel FP50CC please

    That was meant to be practicalmachinist.com/vb/deckel-maho-aciera-abene-mills/ but it came out wrong.
    Bill

  4. #4
    Registered
    Join Date
    Feb 2008
    Posts
    15

    Re: I need technical support for Deckel FP50CC please

    Quote Originally Posted by WCD9 View Post
    Try https://www.cnczone.com/vb/deckel-ma...a-abene-mills/. There are very experienced people there.
    Note to Moderator - I hope this post does not contravene forum rules - I'm just trying to assist the OP.

    Bill
    This website is no longer available

  5. #5
    Registered
    Join Date
    Feb 2008
    Posts
    15

    Re: I need technical support for Deckel FP50CC please

    Praise be to Allaah
    My machine has been repairedAttachment 455058Attachment 455058Attachment 455060

  6. #6
    Registered
    Join Date
    Feb 2008
    Posts
    15

    Re: I need technical support for Deckel FP50CC please

    The same problem is repeated again

Similar Threads

  1. technical support
    By polillo26 in forum SIEMENS Sinumerik CNC controls
    Replies: 0
    Last Post: 12-30-2018, 08:27 AM
  2. vero technical support
    By camaru in forum Surfcam
    Replies: 1
    Last Post: 12-12-2017, 02:12 PM
  3. CMS Technical Support needed
    By CGR in forum CNC Machining Centers
    Replies: 0
    Last Post: 02-10-2012, 08:49 PM
  4. Technical Support Representative
    By mgrtorm in forum Employment Opportunity
    Replies: 0
    Last Post: 12-26-2008, 09:09 PM
  5. Amazing Technical Support
    By DonFrambach in forum Vectric
    Replies: 1
    Last Post: 12-08-2008, 03:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •