[pirke86]

I am currently in the proces of doing a emc2 retrofit on a maho mh400c.

The maho uses a analog servo drive and motors from indramat.
the servodrive is a indramat 3trm2.

i am currently still gathering information on the build and how to hook up the servo amp to my mesa boards.

i have the following boards:
1x Mesa 5i20
1x Mesa 7i33(TA)
2x Mesa 7i37(TA)

if anyone has any experience about these servo amps i would like to hear from them, any info would be very apreciated.

[pirke86]

nobody?

[gridley51]

I have sent you a PM
Mark.

[smoregrava]

Hi Pirke86 have you had any luck on your retrofit. I will try to retrofit my Maho mh500C with a Fagor 8055 control. And since the servo motors and indramat 3TRM2 drive have worked nice all the time I'm planning to use them on the new control.

If you have any info og a manual regarding the 3TRM2 I'm very interested

[jpc1]

Hoi Pirke,

Kan je eens contact met me opnemen ivm Indramat 3TRM2

[email protected]


groeten
jean-paul