Hi evrybody!
I am new to Fanuc 12M ,can anyone help me how to change the Japanese display on Fanuc 12M to ...English? I think there are a parameter... but I don't know or ...I have to change the software?
Does anyone know about the special parameters of Fanuc 12M?
Any help will appreciated
Thanks
duc
Thread: Japanese display on Fanuc 12M
Results 1 to 3 of 3
-
07-13-2008, 08:23 AM #1
Registered
- Join Date
- Jun 2006
- Posts
- 31
Japanese display on Fanuc 12M
-
07-15-2008, 03:29 PM #2
Gold Member
- Join Date
- Jun 2008
- Posts
- 1511
I am not sure about the 12M control. On our 15MF and 15TA models it is parameter 2205 bit 2 is set to 1 for english. All the other bits equal 0.
Stevo
-
07-16-2008, 02:49 PM #3
Registered
- Join Date
- Jun 2006
- Posts
- 31
Fanuc 12M
Thanks for your help,Stevo
Originally Posted by stevo1
I tried as you said ,parameter 2205: 00000100 but ...the Japanese is still display on monitor.I need the manuals for 12M,I don'd have the operator's manual nor maitenance manual ...about this OKK MCH600/Fanuc 12M,only the machine .Can anyone help me,please?
Any help will be highly appreciated.
tungtung
Reply With QuoteSimilar Threads
-
Fanuc Oi-MB Relative display
By zooloader in forum FanucReplies: 7Last Post: 10-28-2021, 01:57 AM -
Fanuc 0i-TC Display Parameter
By Hoonie in forum FanucReplies: 5Last Post: 05-20-2008, 07:44 PM -
Change Japanese display on monitor?!
By nkd in forum CNC Machining CentersReplies: 1Last Post: 04-02-2007, 10:29 PM -
Position Display on fanuc 6m
By fredf1 in forum FanucReplies: 1Last Post: 10-22-2005, 10:08 AM
Posting Permissions
