547,337 active members*
2,482 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Kitamura > Kitamura HX-250 Coolant Through / Pull Studs
Results 1 to 2 of 2
  1. #1

    Join Date
    Apr 2021
    Posts
    2

    Talking Kitamura HX-250 Coolant Through / Pull Studs

    Hi,

    Looking to see if anyone might have some information on a Kitamura HX-250, BT30 Machine.

    Just got this machine In Service and have a job coming up for it. When getting the machine, it didn't come with manuals.

    Contacted Kitamura USA and they gave me PDF's on the different pull studs.

    On the machine I see a high pressure pump for through coolant, but I don't know the M command to Turn it on.

    Haven't bought holders or studs yet, incase I'm just being an idiot.

    So my question(s) is What M command turns on through spindle coolant. Also if someone else has one of these machines, are the BT30 Tool holders single contact?

    Thanks in Advance,

    Rich

    Edit: Yasnac I-80 M controller

  2. #2

    Join Date
    Apr 2021
    Posts
    2

    Re: Kitamura HX-250 Coolant Through / Pull Studs

    So I think it's M7, because I get the air blow after it turns off and it looks that the pump is turning on. No coolant thou. I'm thinking the inlet it clogged. I'll take a look at it tomorrow

Similar Threads

  1. Pull studs
    By Scrambled1 in forum HURCO
    Replies: 0
    Last Post: 11-20-2016, 08:19 PM
  2. Which CAT 40 pull studs?
    By sortafast in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 08-03-2013, 05:28 PM
  3. What pull studs
    By zcases in forum Fadal
    Replies: 1
    Last Post: 11-03-2012, 10:54 PM
  4. pull studs
    By najnielkp in forum Uncategorised MetalWorking Machines
    Replies: 8
    Last Post: 06-12-2009, 02:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •