I’m setting up a Mori Seiki lathe in Edgecam.
In practice we often start machining a job on the sub spindle, later we we’re spindle-docking and we continue machining the same part on the main spindle.
(The order of machining, starting at main or sub, depends on several factors such as tool-length, product-accuracy and reachability around chucks.)
Does somebody know how to dock product + stock from sub to main?
Results 1 to 3 of 3
-
02-21-2009, 10:38 AM #1
Registered
- Join Date
- Feb 2009
- Posts
- 2
Lathe in Edgecam: Spindle-docking from Sub to Main
-
03-04-2009, 04:13 AM #2
Registered
- Join Date
- Jun 2003
- Posts
- 73
As of Edgecam 2009 R1 docking from sub spindle to main is NOT supported. Give your reseller a call and have him put it in as a enhancement request.
Mike W.
-
03-04-2009, 11:20 AM #3
Registered
- Join Date
- Feb 2009
- Posts
- 2
Was this functionality available in previous versions?
Reply With QuoteSimilar Threads
-
FANUC AC MAIN SPINDLE problem!!
By Cole84 in forum FanucReplies: 19Last Post: 01-03-2015, 08:14 PM -
Changing the main drive belt on the spindle
By Michael82 in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 01-06-2009, 03:09 PM -
puma 400LM main spindle stabillity, got any?
By M-man in forum Daewoo/DoosanReplies: 1Last Post: 03-22-2008, 01:21 PM -
Docking station
By Jim Estes in forum XylotexReplies: 1Last Post: 01-22-2008, 12:38 PM -
How to control the speed of the main spindle?
By george128306 in forum Hobbycnc (Products)Replies: 5Last Post: 04-15-2006, 10:00 AM
Posting Permissions
