540,361 active members*
1,068 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > UCCNC Control Software > Looking for UCCNC Software Profile for Sherline Mill ???
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Jan 2021
    Posts
    3

    Lightbulb Looking for UCCNC Software Profile for Sherline Mill ???

    I have a Sherline 5400 CNC mill with a uc100 USB controller. I am wanting to try the UCCNC controller software, does anyone have a working profile for a Sherline mill they could share?

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    35442

    Re: Looking for UCCNC Software Profile for Sherline Mill ???

    You could always write down the port and pin numbers used in Mach3, and manually enter them in UCCNC. It's probably only 10-12.

    Or UCCNC can import the Mach3 profile, but this can sometimes have some minor issues.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •