[sidi_steve]

The following is a quick list of suppliers of low cost laser engravers. I don't know the best way to maintain a list here, but if people find other suppliers with websites, seems like this would be a good place to put them. This list is not an endorsement for any of the websites or suppliers, just what I have stumbled on or been lead to...

Low Cost Laser Engravers:

China Optronics
STDK-4028
http://www.chinaoptronics.com/engraver.htm

HKXY
custom made
website..?

Ink Express
IE300 laser engraver
http://www.iehk.net

Jinan Hengxing Computer Equipment Manufacturing Co.
Rabbit HX40A
http://www.hxlaser.com/en/index.htm

Red Sail: HF Laser
3040B
http://www.hflaser.com/jgdbj.html

Wuhan Huahai Photoelectron Co.
H40w Laser Engraving Machine
http://www.huahailaser.com/eng/cpjj2.asp?id=173

[zcream]

Hi mate! This is an inquiry for buying a laser cutter for making a custom
rubber/plastic/metal holder.

This would be a Circular piece of rubber/metal/plastic (diameter 57mm). In the Center
it has a rectangular cutout, that is approx. 35.5mm x 24 mm. The thickness of the rubber/metal/plastic should be about 2.5mm.

Essentially I was going to buy a strip of 2.5mm thick rubber/metal/plastic and make
cuts to end up with my final piece.

The rubber/metal/plastic thickness is not much, and I am only looking at a 100 pcs a
month, so its a low volume, low strength application.

I was thinking that rubber or plastic could be cut by a low end laser. Would love to hear your recommendations .

Thanks!

[MacGyver]

Answered in the other thread you posted this question in...