Hello Everyone,
I've recently purchased DolphinCAD-CAM for my home 3-axis CNC router, and I've been having some problems getting Mach3 to read the output G-code from Dolphin's suggested M_MACH3.ppr they provide.
I've run successful area-clear commands with the M_MACH3.ppr, but I had to switch to the M_MACH3_IJInc_23nov2013.ppr (that they also provide) in order to run successful contouring operations.
Now I'm attempting to run a file that has peck-drilling, contouring, and area-clear operations with the same M_MACH3_IJInc_23nov2013.ppr but my MACH3 software is having problems reading it output specifically for the peck-drilling operations.
So, I've tested all the .ppr that DolphinCAD-CAM provides and none of them output g-code that my Mach3 software is able to read successfully. I'm out of options...:drowning:
I've provided the files below; hopefully one of you guys can help me out, I would greatly appreciate it.