537,778 active members*
4,117 visitors online*
Register for free
Results 1 to 1 of 1
  1. #1
    Join Date
    Dec 2020

    Manual for Velox VR-3636

    I recently bought an unused CNC from an estate sale, but I don't have the manuals or setup. It was a sweet deal and the computer that was built with it was never hooked up or even turned on. Having said that, I would like some documentation regarding setup if anyone has one for a Velox CNC 3636. I have tried to contact the company, but they seem to have gone dark recently, as their phone has been disconnected and their last post was April 2020. Any help or advice would be appreciated. Thank you

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003

    Re: Manual for Velox VR-3636

    I doubt the machine even came with a manual.

    It was probably using Mach3 for it's control software. You can find a Mach3 manual at Newfangled Solutions CNC Software Home of Mach3

    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CNC Dovetails & Box Joints

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts