Johnboy13 
Hello all, I have a brand new Haas ST10. I program it with mastercam x6. My post is not the best and I would like to modify it. I have already made some successful changes, but now I'm stumped. The post wants to spit out both G97 and G96 codes for every tool? I just want something nice and simple. Maybe a G50 line (max speed)with a G96/G97 line to follow depending on what I selected. Any ideas? Thanks.
Thread: Mastercam post
Results 1 to 4 of 4
Hybrid View
-
08-06-2014, 09:37 AM #1
Registered
- Join Date
- Jan 2014
- Posts
- 27
Mastercam post
-
08-07-2014, 08:28 PM #2
Registered
- Join Date
- Jul 2013
- Posts
- 1
Re: Mastercam post
g97 and g96 codes are spit out for machine wear, so machine doesn't cycle at constant surface speed as it winds up and down.
-
08-08-2014, 03:30 AM #3
Registered
- Join Date
- Jan 2014
- Posts
- 27
Re: Mastercam post
-
08-08-2014, 03:32 AM #4
Registered
- Join Date
- Jan 2014
- Posts
- 27
Re: Mastercam post
This is what it posts out. This is correct?
Sent from my SPH-L720 using Tapatalk
Similar Threads
-
mastercam post
By mamonluk2001 in forum Post Processors for MCReplies: 1Last Post: 02-16-2013, 03:45 AM -
Mastercam Post Help!!!
By msavcic in forum HURCOReplies: 4Last Post: 01-02-2012, 07:39 AM -
Mastercam x5 Post HELP!
By johnston.jer in forum EDM Discussion General TopicsReplies: 0Last Post: 10-11-2011, 02:04 PM -
Post for Haas vmc in Mastercam or post help
By bob1112 in forum Haas MillsReplies: 11Last Post: 03-03-2008, 12:09 AM -
please help with mastercam v9 post
By gasho in forum MetalWork DiscussionReplies: 1Last Post: 12-01-2006, 03:53 PM
Tags for this Thread
Posting Permissions
