535,443 active members*
2,755 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > General CNC Machine Related Electronics > Masterwood Project 323 (1993) Retrofit under Tecnos GA PLC (near MW309)
Results 1 to 2 of 2
  1. #1

    Masterwood Project 323 (1993) Retrofit under Tecnos GA PLC (near MW309)

    Hello,

    i put a scheme of what i want to do :


    I bougth a piece of card (Z80, CPU683 68EC020 PLC Tecnos system and input / output) for upgrade my cnc Master Project 323 who's working correctely with his old system under Dos ... but not very easy to use
    These cards was working into a Masterwood Project 309 retrofitted

    I replace old card (68000 named 681) by 683
    and Z80 Si_89 by Si_96

    I wonder if someone could help me to introduce good parameter to make it working ?

    With some photos of retrofit of the Masterwood :

    this new CPU3-2M CPU68EC020-2003-01 (31SFC104640) card

    will replace the older CPU1 (68000) KTC91
    new old

    The old I/O cards (ACCTC90/02) will be replaced by new I/O cards 61SFA300101 (ASSI_CC_2007_01)


    The communication interface Si2.5 is replaced too by SFS10150 SI_96_01 (31SFS101460)



    and RamDisk Card is suppressed because no need anymore

    the software MasterWork drive everything

    To be followed,
    Regards, GLP

  2. #2

    Re: Masterwood Project 323 (1993) Retrofit under Tecnos GA PLC (near MW309)

    Hello,
    some pictures of what I want to do
    is there anybody in the place who knows Tecnos controller ?

    specialist of Masterwork parameters ?

    Thanks, bye.
    Attached Thumbnails Attached Thumbnails config IO MasterWood Project 323 running.jpg  

Similar Threads

  1. Masterwood Retrofit
    By leprovostgildas in forum CNC Machining Centers
    Replies: 1
    Last Post: 12-29-2020, 04:41 PM
  2. Masterwood Project 313
    By 9thraven in forum CNC Machining Centers
    Replies: 5
    Last Post: 02-28-2018, 04:46 PM
  3. Control Retrofit for 1993 Fadal 6030
    By dunnitagain in forum Fadal
    Replies: 18
    Last Post: 07-19-2015, 11:49 PM
  4. Masterwood Project 416 K
    By Chad1 in forum CNC Machining Centers
    Replies: 1
    Last Post: 01-24-2012, 10:28 AM
  5. Masterwood Project 319-323
    By Tarpin in forum Commercial CNC Wood Routers
    Replies: 7
    Last Post: 01-29-2011, 03:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •