I have a TL2 and MasterCAMX MR2 with post processors from both my reseller and direct from MasterCAM. The problem is whenever a toolchange is called for I get
With the TL post G28 M05 which sends the machine home. This tends to take a bit of time.
With the Generic Has 2X post - G28 U0. V0. M05 Again sending the machine home.
I have tried to set the default home position in the tool, in the default, and in the machine in mastercam which kinda leads me to think that the post is forcing a G28. Has anyoneelse ran into this and hopefully found a fix?