Hello,
I have the following problem: I have to mill a hexagon with a wrench size of 46mm. That, so far is not a problem; however my hexagon has many different long surfaces!! What could be the reason for this?
The machine is a Maho MH 500 with 432 controller.
Can anybody help me?
Thank you
Regards Til
Thread: mill a hexagon
Results 1 to 4 of 4
-
09-23-2011, 11:31 AM #1
- Join Date
- Sep 2011
- Posts
- 20
-
09-23-2011, 03:21 PM #2
- Join Date
- Jul 2011
- Posts
- 9
Hello Chopper87
How does your program look like? And where is the neutral point?
There are several ways to mill a hexagon.
-
09-24-2011, 04:41 PM #3
Administrator
- Join Date
- Dec 2001
- Posts
- 5090
Hello
I think the same : post your program so we can have a look at what happened… thanks.
Cartesian / polar, incremental or absolute….<b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.
-
09-25-2011, 05:07 PM #4
- Join Date
- Nov 2004
- Posts
- 2486
Hello
To mill a hexagon there are a few good and cheap software available to calculate it.
e.g. Geometrix
Regards Boern<b><br />Das dringendste Problem der Technologie von heute ist nicht mehr die Befriedigung von Grundbedürfnissen und uralten Wünschen der Menschen, sondern die Beseitigung von Übeln und Schäden, welche uns die Technologie von gestern hinterlassen hat.</b><br /><br />Dennis Gabor (1900-79), ungar.-brit. Physiker, Entwickler der Holographie, 1971 Nobelpr.
Reply With Quote
Posting Permissions
