562,490 active members*
3,700 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Dec 2020
    Posts
    2

    Mitsubishi Meldas 86M on OKK PCV40

    My PCV40 was down for a time. Battery went dead. I have recharged it by powering it up and leaving it idle until the battery alarm has cleared. On the screen I see no X Y or Z on the position screen. Also most of the LEDs on the control panel are blinking simultaneously keeping me from selecting modes. I recalled doing a reset of the motherboard. I have that procedure which I will try next. I have the procedure for entering parameters that was faxed to me years ago. I am missing a page of that.

    Would any of the elders here have that info? I called Mitsubishi more than once and got nothing.
    This is an 86M control. Machine has a build date of 1986.
    Thanks,
    Mark Neary

  2. #2
    Member
    Join Date
    Sep 2021
    Posts
    29

    Re: Mitsubishi Meldas 86M on OKK PCV40

    DEAR SIR.
    I AM THUONG FROM VIETNAM.
    I HAVE THE OKK MACHINE THAT UNDER THE CONTROLLED BY MELDAS 86GII.
    I THINK BOTH THE CONTROLLER ARE THE SAME TYPE.
    SO IF YOU HAVE THE MAINTENANCE MANUAL OF MELDAS 86M. PLEASE SHARE WITH ME WITH YOUR GENEROSITY.

    THANKS AND BEST REGARDS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •