[Ecmdrw5]

I have a program that will not fit in the limited memory(16KB I believe) in our MV-40. I can't find the manual for the machine anywhere. On our newer mori i would use the tape mode which has more space, but I'm not sure how to work this one. Can anyone help me out with this situation?

[underthetire]

Should be the same, unless your new Mori has a MAPPS control, then DNC is probably running through the MAPPS memory. MFM6 wouldn't have that obviously, so you would just drip feed through the comm port.

[Ecmdrw5]

Well the problem I'm having is it doesn't seem to work the same way... I asked one of the other guys in the shop and he came over and said "it's easy.....oh.....why doesn't this one work that way?"

[underthetire]

Well, it doesn't work really makes it tough to help.
What does it do? What model is your newer mori? Is this a older MV40 with rotary knobs or a flat panel for the operator panel. How is you PC set up for communications?

[fordav11]

MF-M6 is just a Fanuc 16. Nothing special there.
You should be able to set up DNC like any other Fanuc 16.
Did you get any progress with your issue?