527,825 active members*
2,285 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jul 2020
    Posts
    4

    NEED ADVICE - grooving OD

    Hello all. New to cnc machining, need some expert advice.
    I want to turn a groove in a 1.5” mild steel shaft, 0.5” deep, 0.5” wide. I’m using a Sandvik grooving/parting insert. What is a good starting point for speeds and feeds when I’m doing this? Recommended spindle rpm? Any help is appreciated.

  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4433

    Re: NEED ADVICE - grooving OD

    I guess I would start at about 200 SFM for the spindle, maybe 0.005 IPR feed. You will most likely want to use constant surface speed. Peck feed.
    Jim Dawson
    Sandy, Oregon, USA

Similar Threads

  1. ID Grooving Issue
    By tcovington in forum CNC Tooling
    Replies: 1
    Last Post: 07-26-2016, 03:34 PM
  2. Grooving toolpath strategy advice
    By Robert M in forum Mastercam
    Replies: 5
    Last Post: 02-17-2015, 01:40 PM
  3. axial grooving; Oi-TC
    By Fräsling in forum Fanuc
    Replies: 1
    Last Post: 10-09-2011, 06:56 PM
  4. Grooving HELP!
    By modeltruckshop@ in forum Uncategorised MetalWorking Machines
    Replies: 4
    Last Post: 04-23-2009, 02:49 AM
  5. What is the G code for Grooving? Not G75?
    By cjchands in forum Mach Software (ArtSoft software)
    Replies: 7
    Last Post: 04-22-2007, 11:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •