I'm trying to put dimensions on drawings,but they are so small it's hard to read them.I tried to go to different places to find a setting and can't find one.As far as writng text,I found out how to get the correct size I want. I'm sure it's simple but don't know where to locate the setting.Thanks for any advise somebody could give me.
Thread: Need a little help.
Results 1 to 3 of 3
-
01-27-2009, 05:40 PM #1
Registered
- Join Date
- Sep 2008
- Posts
- 8
Need a little help.
-
01-27-2009, 11:24 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
AutoCAD or Inventor?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
01-28-2009, 12:28 AM #3
Registered
- Join Date
- Jan 2009
- Posts
- 27
If this is autocad: go to "format","Dimension style" (a window will pop up)"modify","fit" at lower right there is a box call "scale" should shown 1.0, make it 2.0 if you want the text twice as big. then "close" it will take you to the first window make sure to hit "set current'
Good luck.
Reply With Quote
Posting Permissions
