[mskaggs67]

HELP. I have a new 80w CO2 Chinese laser. I put a simple text file in RDworks v8 and upload it to the controller/ The output is just a solid burned line no matter the power or speed settings. When I change the file from "Scan" to "Cut" it does burn the text but connects all of the letters together with a burned line. I really think this is a setting problem of some kind, but I have tried everything.

Frustrated in East Texas

[epilotdk]

Normally you use a bitmap file for engraving. Are you importing a .txt file?

[Bigbird48]

can I see the file your trying to engrave

[mskaggs67]

can I see the file your trying to engrave

Here is a YouTube of the file and what the laser engraveshttps://youtu.be/WobVbhPuDQA

[Bigbird48]

that doesn't tell me anything can you post the file in corel x5 or AI or dxf

[mskaggs67]

can I see the file your trying to engrave

The file is just a simple text file in RDWorks that is uploaded directly into the controller.

[Bigbird48]

Fine if we cant see the exact file you can expect no help

The file is just a simple text file in RDWorks that is uploaded directly into the controller.

[cherrywklaser]

Mostly the software setting problem, normally the corner engraivng speed or power setting............


Emily Cheng

Direct contact Email: [email protected]
ADD: C-504, In hi Tech square High-Tech Zone, Jinan, Shandong, China
Tel: +86 0531 88020976
Mob / Whatsapp: 008618905413376 Skype: G.Weike Emily Cheng
Web: Fiber laser cutting machine, Metal laser cutting machine - G.Weike www.wklaser.com

[Bigbird48]

Well if he show us the file and the settings we could help him

Mostly the software setting problem, normally the corner engraivng speed or power setting............


Emily Cheng

Direct contact Email: [email protected]
ADD: C-504, In hi Tech square High-Tech Zone, Jinan, Shandong, China
Tel: +86 0531 88020976
Mob / Whatsapp: 008618905413376 Skype: G.Weike Emily Cheng
Web: Fiber laser cutting machine, Metal laser cutting machine - G.Weike www.wklaser.com

[abyss]

Try to engrave on MDF or paper attached file.
It is circle + square (no fill) and scanned m67 letters. Roughly 1"x2" in size all.

[Bigbird48]

Cant open can you post as a dxf,cdr or ai file

Try to engrave on MDF or paper attached file.
It is circle + square (no fill) and scanned m67 letters. Roughly 1"x2" in size all.

[abyss]

This file is .rd for mskaggs67 (not for you) to he can put it directly on USB stick and cut/engrave. This way he can check and confirm his machine is ok (if cut/engrave this file properly).