Hi All,
I would like to know what is the correct voltage selection on my products, because after i connect them last night, my drivers and motors where to hot.
Motors : 57GYBH115-003 voltsge 3.8 current 3.0 A/PHASE (See Attached)
Drivers : M542 20 - 50 DC connected to 48DC power supply (See attache image and M542 PDF(page 7-8))
Also i use mm's and i cannot calibrate my machine.
formula i use: on my drivers i use dip combination 1600, my screw is 1.5mm pitch,
1600/1.5 = 1066.66667 i know that with the screw i use i will always have lost, but is temporary, i will buy good lead or ball screws, anyway i should be close at least.
Sorry for the long post i really need your help.
THANKS !