Re: New Rapid Turn Installed
Originally Posted by
jttoner
I'm using the WildHorse switch for the VFD keys but wish there were a switch available for the motor's power cable. It's not difficult to change, just an annoyance.
Plenty of switches available. Just find a two position, three pole rotary switch. I recommend a Kraus-Naimer CA10 A233, but since this switch is seldom operated, and never under load, you could also just use a cheap knockoff.
At least one other individual here posted previously about adding a switch like this.
Tim
Tormach 1100-3, Grizzly G0709 lathe, Clausing 8520 mill, SolidWorks, HSMWorks.