[Markiewicz55]

I have an LB10 lathe that is leaking coolant to the other tool holders. I am guessing some seal is bad on the back side of the turret.

I tried removing it once but am missing something. Does anyone know the process to remove the turret to replace this seal?

Thanks Much!

[landslide1]

I have the parts manual for the 87 model. not really a service guide but it gives you an idea of how it goes together.
let me know if you want a scan

[Markiewicz55]

If you would have the time and could copy it down I think it would be helpful. To me and others in the future looking for this that would be a big help. Thanks much!

[landslide1]

Attachment 407794
Attachment 407796
Attachment 407798
Attachment 407800
Attachment 407802
Attachment 407804
Attachment 407806

- - - Updated - - -

sorry about the funny rotation on the scans

[MCR-B II]

?n number 3 , 9.part has only 1 hole. Coolant flows through this hole. If there is high pressure coolant pump ,maybe it is normal. If normal pressure pump, the gap between part number 9 and 12 is bigger than normal. I think this the problem. Not back side.