547,432 active members*
2,102 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Okuma OSP300 system variables
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Jun 2004
    Posts
    7

    Okuma OSP300 system variables

    Hi all,

    Has anyone got a complete list of system variables, (VS), for the Okuma OSP300 control they can pass to me please.

    I'm trying to control the tool measure in cycle for new tools via the "USE" toggle.

    Cheers in advance

    Alan

  2. #2
    Member
    Join Date
    Aug 2011
    Posts
    297

    Re: Okuma OSP300 system variables

    "Imagination is more important than knowledge."

  3. #3
    Member
    Join Date
    Jun 2015
    Posts
    3458

    Re: Okuma OSP300 system variables

    hy if you look for VS+ :
    ... a-z, then check attached list of system variables
    ... 0-9, then you will need to dig the msb files, or look through the manuals; those are not system variable, but kind of a mix type, between common/array and local; however, they allow acces to data for measuring cycles and probes, allowing one, for example, to custom build a gauging cycle

    for more details, please be specific / kindly

Similar Threads

  1. # on Okuma OSP300
    By ablackwell in forum Okuma
    Replies: 1
    Last Post: 06-09-2021, 06:48 AM
  2. Okuma System Variables
    By frameguy99 in forum Okuma
    Replies: 5
    Last Post: 11-04-2020, 08:28 PM
  3. Replies: 7
    Last Post: 10-08-2018, 04:25 PM
  4. Okuma Genos with OSP300 using IGF
    By hutch07 in forum Okuma
    Replies: 4
    Last Post: 02-02-2018, 07:28 AM
  5. pls, a post for okuma mb66vb osp300 ?
    By deadlykitten in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 06-22-2017, 10:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •