Hi guys.
Just received a 8 x 4 Plasma table from Omni CNC. It has a Microstep CC-M3 Controller and Microstep SH-HC30T THC. It arrived with zero documentation so I'm working through it slowly.It was wired up yesterday and from memory I could originally jog the torch up and down through the controller. Now the Z axis won't jog in manual or move in auto at all. X and Y axis are fine. Left it overnight and Z axis is still not responding.
The motor is engaging as you can't physically move it when the machine is on.
When I press the K6 button on the controller the torch will rise until I press K6 again.
Any help would be much appreciated.
Cheers Jason